The PTZ-HD-10T is a
1080p HD-TVI PTZ security camera with built-in infrared night vision. This camera captures high definition video surveillance at 1920 x 1080 resolution (2 megapixel). The PTZ-HD-10T has a 10x optical zoom range using a 5 ~ 50mm lens and a max IR distance of 150 feet (50 meters) which allows the camera to see in zero light environments. This pan, tilt, and zoom dome security camera has a 1/3" Sony image sensor. Please check out this video demo and these sample surveillance images.
All of the vital components of this camera are enclosed in an
IP66 rated outdoor dome housing that safeguards against harsh weather, dust, humidity, and acts of vandalism. The PTZ-HD-10T is hard wired to a DVR using RG59 coaxial cable. As with all HD-TVI security cameras, they must be used with an HD-TVI compatible DVR.
The PTZ-HD-10T
supports Pelco D and Pelco P protocols as well as UTC (up the coax). UTC transmits the PTZ controls over the same RG59 cable used for video (so there is no need to run an additional pair of cables). For use in low light environments, this camera has a color Lux rating of 0.1 and a Black and White Lux rating of 0.01.
Also featured are
6 giant LEDs that provide an effective Infrared range of up to 50 meters / 150 feet. The IR LED illuminators are set to automatically activate when the camera senses low light beyond the capability of the lux ratings. An IR Cut Filter enhances the image quality by blocking any unusable infrared lighting and only allowing the visible light to pass through.
This camera supports an endless 360° pan, up to 220 individual preset points and wall mount bracket for easy installation.
The 12VDC power supply is included.
AHD PTZ Dome Camera Features
- 1/3" Sony Image Sensor
- 1920 x 1080 Resolution / 1080P / 2 megapixel
- Compatible with HD-TVI DVRs
- Video Connector: BNC
- Power Connector: Screw Terminals (2.1mm Pigtail Included)
- 6 Giant IR LEDs
- Effective Infrared Range of 50 Meters / 150 Feet
- UTC / UP The Coax PTZ Support
- 4-in-1 Camera - Selectable HD-TVI, AHD, HDCVI, and Analog CCTV Video Modes
- Auto White Balance
- IR Cut Filter
- Back Light Compensation (BLC)
- IP66 Weatherproof Housing
- Indoor or Outdoor Surveillance
- 10x optical zoom ( 5 ~ 50 mm )
- Continuous 360° Rotation
- Pelco D & P Protocol Compatible
- Up to 220 Preset Points
- PTZ Control via Stand Alone DVRs or RS-485 PTZ controller
- PTZ Control via iPhone and Android Mobile Apps when connected to a Compatible DVR (iDVR-PRO Recommended)
- Optional Pendant Ceiling Mount
- Voltage - 12VDC
- 12VDC Power Supply Included
Be sure to click on the gear icon in the lower right of the video and select 1080p resolution if you are viewing from a desktop computer.
Watch this video to see the PTZ-HD-10T controlled by an iDVR-PRO surveillance DVR. You will also how the automatic tour and scan modes work.
The following images were captured with a PTZ-HD-10T connected to an iDVR-PRO DVR. Please click on these images to see the full 1080p resolution images.
This camera monitors the back of CCTV Camera Pros warehouse. In this first image, the camera's lens is zoomed out to the widest angle.
This is the same angle, but the PTZ control menu is enabled on the DVR.
In this image, the lens is zoomed all the way. This dumpster is located 103 feet away from the camera. You can see that at even at 100 feet away, letters and numbers can be read on the dumpster.
The PTZ-HD-10T supports UTC, which stands for "Up The Coax". It is a technology that allows the video and PTZ commands to both transmit over the same RG59 coax cable.
This is how to wire this UTC compatible PTZ to a DVR. In this example, we are using a Viewtron
CCTV camera DVR.
- Blue Wire - RG59 coax cable is run from the PTZ camera to a video input on the DVR. This will transmit the video signal and pan tilt zoom commands.
- Red Wire - Power cable, typically 18/2 stranded power wire is run from the camera to a multi-camera power supply box or the single camera power transformer that is supplied with the camera. *Please note that installers can use RG59 Siamese cable which contains both RG59 coax and 18/2 power cable to run both power and video / UTC cables.
- Green Wire - Optionally, the DVR is connected to a router / Internet connection using CAT-5e cable if the user wants to enable remote viewing and remote PTZ control via mobile apps and desktop software for Mac or Windows.
You can find our complete
PTZ camera controller and installation guide here.
Optional Pendant Mount
Click on the image above for a larger view
PTZ Corner Mount Bracket (optional)
This is the optional corner mount bracket for this PTZ camera.
Product Specification
Download the
PTZ-HD-10 product specification here.
20x Zoom / 300 Foot IR Model
The PTZ-HD-20 is a larger version of the PTZ-HD-10. It supports a 20x optical zoom lens and a 300 foot IR rating. Please click here to learn more about this
20x Zoom HD-TVI infrared PTZ camera.
Compatible with iDVR-PRO HD DVRs
The PTZ-HD-10T works great with iDVR-PRO hybrid surveillance DVRs. iDVR-PROs support analog CCTV, HD-TVI and AHD CCTV cameras. The remote camera viewing via mobile apps, Mac, and
Windows software is excellent.
iPhone / iPad Compatible
|
Android Compatible
|
Mac Compatible
|
Click here to learn more about the latest
iDVR-PRO HD CCTV DVRs.
iDVR-PRO Works with Analog CCTV and HD Security Cameras
Users can mix and match different camera technologies. This is perfect for customers that have existing CCTV cameras and want to upgrade to high definition over time. All DVR channels support all camera types. iDVR-PRO DVRs work with the following security camera types and resolutions.
Request a Demo
Want to see how live video on this camera looks remotely over the Internet, please request a demo login below. You will be able to log in from iPhone, iPad, and Android mobile devices. You can also log in from Macintosh and Windows computers. Please
click here to request a demo login.
