 |
The AHD-VD104 is a 4 port HD CCTV video splitter and amplifier supports AHD, HD-CVI, and HD-TVI high definition CCTV video formats. The AHD-VD104 is used to split one BNC video input to four BNC outputs. This is an active/powered device that also acts as an amplifier. Each BNC video output can be run up to 300 meters / 900 feet using RG59 coax cable. In an HD video surveillance application, AHD-VD104 can be used to share the video signal from an HD CCTV camera (AHD, HD-CVI, or HD-TVI) CCTV between four DVRs or monitors. This product is also known as AHD-VD104V2, as it is our second generation.
HD CCTV Splitter / Amplifier Features
- 1 BNC Video Input
- 4 BNC Video Outputs
- Splits Video 1x4
- Works with AHD, HD-CVI, and HD-TVI Format Security Cameras
- Works with RG59 and RG6 Coax Cable
- Video Range: 1.0Vp--p/75Ω
- Impedance: 75Ω
- Video Bandwidth: 36Mhz
- Video Extend Distance: 300 meters / 900 feet
- Supported Resolutions: 1080p 25/30, 720p 25/30/50/60. 960H, 960p, D1
- Operating Temperature: -20°C~150°C
- Dimensions: 140mm x 100mm x 26mm
- Weight: 230 grams / .5 pounds
- 12V DC Power Supply Included
This splitter
does NOT work with HD-SDI cameras. Please click here for HD-SDI splitters.
1 to 4 CCTV / AHD / HD-TVI / HD-CVI Video Splitter
Here is an example of how the 1 to 4 BNC video splitter can be used in a security camera installation. The security camera is connected to the BNC video input of the amp / splitter. Typically RG59 cable with BNC connectors is used. Please note that the camera can be an HD BNC camera (1080p or 720p resolution). AHD, HD-TVI, and HD-CVI video formats are supported. This video splitter also supports analog CCTV cameras (D1 and 960H resolution). The 4 BNC video outputs are connected to 2
BNC monitors and 2 security camera DVRs.
Power Switch
Here is front view of the AHD-VD104. The BNC connectors and power supply input are on the back. There is a power switch located on the front.
|
|
|
Very Helpful 
