The MON-IPZ3 is a 3.5" CCTV test monitor that also has network IP camera functions such as a network scanner, Ethernet / POE tester, IP address tester and audio surveillance tester. This test monitor can power a DC camera using the 12V-DC 1 Amp power output allowing the installer to mount, focus and test the CCTV camera before running any cable (Only works with 12V-DC cameras rated up to 1 Amp).

When installing IP cameras, this monitor can be used to identify the IP address of the cable run and test if the cable is supplying POE (Power over Ethernet). This monitor is designed to only test the cable and does not display the video stream of the IP camera. However, we do have this 7" tester that DOES display video from IP cameras.The 3.5" LCD screen and provides a crisp, clear image. The brightness, contrast and saturation are fully adjustable. Installers can test communication with PTZ cameras using the built in pan tilt zoom controls. It supports more than 30 PTZ protocols, making it compatible with most PTZ cameras used today. The MON-IPZ3 charges in 4 ~ 5 hours and can last up to 11 hours with normal use. The auto detect feature of the monitor automatically determines whether the camera is PAL or NTSC when connected. The MON-IPZ3 includes a neck strap, RS-485 cables, rechargeable battery, charging cable, BNC cable, cable test box and a carry case to hold everything.

Test Monitor Features

• 3.5 inch LCD Monitor
• BNC Video Input / BNC Video Out
• 12V DC 1 Amp Power output supplies power to CCTV camera being tested
• Used in IP / CCTV Testing and Monitoring
• Built-in PTZ Camera Tester
• Supports Over 30 PTZ Protocols
• Built-in RJ-45 Ethernet Cable Tester
• Built-in POE Tester
• Network IP scanner displays all addresses on the network
• Identifies IP Address of Cat-5 Cable Run
• Carrying Case and Neck Strap
• Rechargeable Li-Ion Battery & Power Supply for Charging
• Up To 11 Hours of Battery Life with Normal Use
• 4 ~ 5 Hour Charge Time
• Works with PAL and NTSC Cameras
• 4GB Micro SD Card Included
• Automatically Detects PAL or NTSC When Connected to a Camera
• Supports RS-232, RS-485 and RS-422

BNC Inputs, RS-232, RS-485, 12V DC Power Output

This is the top of the MON-IPZ3. Here is a breif description of the functions that these connections support.

• BNC Video In: Used to test video from analog CCTV cameras by displaying video on the monitor. Accepts NTSC and PAL cameras.
• BNC Video / Cable Scan: Loop outputs video when a camera is connected to the BNC in. Also can be used with a tone generator (not included) to perform a cable scan.
• 12V DC Output: Used to power 12V DC cameras during installation.
• RS-232: Data monitor tests for RS-232
• RS-485: Used to control PTZ cameras and perform PTZ address search. Data monitor testing for RS-485

UTP Cable Tester, Micro SD Card, UTP Scan

• Micro SD: 4GB SD card is included. The tester is able to capture still photos and videos for testing.
• USB: Charger input.
• UTP / Scan: UTP cable tester so that installers can verify that CAT-5 and CAT-6 Ethernet cables are working properly. Testing your Ethernet cable runs with a professional cable tester can save hours of troubleshooting. The RJ-45 UTP cable jack can be seen on the right side of the test monitor. In addition, this side of this tool displays the Micro SD card slot for recording and mini USB port.

Audio In, LAN, PSE In

• LAN: RJ-45 LAN input can be used to perform network IP scans, PING tests, Ethernet and Phone cable tests.
• PSE In: used to perform port flicker tests and PoE power tests.
• Audio In: used to test audio surveillance microphones.

Test Monitor Accessories

Test Monitor with Camera Power Output