Surveillance DVR Setup Time Date

You are here: Home > Support & Knowledge Base > iDVR-E CCTV DVR Support (Legacy Model) > Setup Time and Date

iDVR-E Series Surveillance DVR Time / Date Setup

The iDVR-E Series Surveillance DVR's time and date is configurable through the DVR's user friendly interface.

Time / Date Setup Instruction (Default Menu)

1. Make sure the recording of the DVR is turned off.

2. Then select Menu, then select System. Once inside System, go into the Time tab.

3. Enter the time and date by pressing the numeric buttons on the remote controller or the "-/+" buttons on the unit.

4.Press "Enter" button to exit a menu and save all changes. Press "ESC" to exit a menu without saving changes.

Quick Setup Menu Instruction

1. Make sure DVR recording is turned off.

2. Then enter the Quick Setup menu by hitting the Menu button on the remote control.

3. Now go into the Time tab, use the numeric buttons on the remote controller or the "+ / -" buttons on the unit to adjust the time and date.

4. Press Enter to save changes and exit the menu or press ESC to exit without saving the changes.