CCTV Multiplexer Time / Date Setup for VM-16RT

This article explains how to configure the time and date on the VM-16RT Video Multiplexer. The unit displays the time and date on the live camera grid. For this setup, the user may use either the buttons on the front of the unit or the infrared remote control included with the VM-16RT CCTV Multiplexer.

CCTV Multiplexer Time / Date Setup for VM-16RT

The information below explains how to change the date and time on the VM-16RT.

1. First, on the front panel of the VM-16RT, press and hold the Menu button until the Main Menu appears on the screen (You may also use the included infrared remote). Then the System Setup box should be highlighted, if it is not, use the Arrow buttons to do so. Press the Enter button to continue. (Shown Below)




2. Now in the System Setup menu, use the left and right arrow buttons to select between the Date and Time settings (Date - Month, Day and Year. Time - Hour, Minutes and Seconds). The setting you are currently on will flash, use the up and down arrows to adjust the setting. Once you have it setup correctly, press the Menu button to save and exit the menu. (Shown Below)




3. Now the date and time entered will be displayed at the top of the live camera grid. (Shown Below)