Please Note: The Geovision GV-BX130D-0 is no longer manufactured and has been replaced by the Geovision GV-BX1500-3V.
The Geovision GV-BX130D-0 network box camera features a
2.8-12mm varifocal lens, providing the installer with a wide range of viewing angles. The Geovision GV-BX130D-0 varifocal network box camera records in 1280 x 1024 resolution at 30 frames per second.
This camera supports simultaneous streams of each H.264, MJPEG and MPEG-4 to meet the needs of any application. The GV-BX130D-0 has a
built-in microphone and can support two way audio. The WDR (Wide Dynamic Range) Enhancement feature enables the camera to produce highly detailed images in ultra bright and dim lighting conditions.
The BX130D-0 is very good in low light environments with a color lux rating of 0.5 and a B/W lux rating of 0.1. If you decide to add an IR illuminator, the GV-BX130D-0 has a
Removable IR Cut Filter to block out the infrared lighting and only allow visible light to pass.
The Geovision GV-BX130D-0 is remotely accessible from a number of devices, including
iPhone, iPad, Android and 3GPP mobile devices. A few more features include motion detection, privacy mask, a tampering alarm, multiple mounting positions and a 31 language web interface.
Geovision GV-BX130D-0 Box Camera Features
- Indoor Only Camera
- 2.8-12mm Varifocal Lens
- 1280 x 1024 at 30FPS
- 1.3 Megapixel CMOS image sensor
- Built-in Microphone
- Access from iPhone, iPad, Android and 3GPP mobile devices
- Supports Two Way Audio
- Motion Detection
- Micro SD / SDHC / SDXC Card Slot
- Dual video streams supported
- Privacy Mask
- Support for TV-Out
- Alarm input and output
- Tampering Alarm
- POE or 12V-DC
- Removable IR Cut Filter
- WDR Enhancement
- 31 Language Web Interface
Mounting Positions
Ceiling Mount
|
|
Wall Mount
|
|
Desk Mount
|
|
|
|
|
|
|
Click on the images above to enlarge.
32 Channel Geovision Software
Each Geovision camera includes a free 32 channel software license which can be used with any Geovision IP camera. Install the software on a Windows computer and create a PC based surveillance DVR / NVR for your Geovision cameras. Click here to view the latest
Geovision software specification.
Remote Viewing Support
Geovision includes many options to view your cameras remotely over a local network and also remotely over the Internet. Remote viewing is supported by both Windows and Mac based PCs. Geovision also includes support to view cameras from cell phones and other mobile devices including: iPhone, iPad, iPod Touch, Android, Blackberry, Windows Mobile, Symbian, and other 3G / 3GPP cell phones. Geovision provides free apps for all of these types of devices. Some remote viewing methods require use of the NVR software that is included with the camera and some methods can connect directly to the camera and do not require a PC be used. Click here for more information on
Geovision remote viewer options.
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about
how to wire IP cameras using a PoE injectors or a PoE switch.
