Please Note: The Geovision GV-BL130D is no longer manufactured, please refer to the Geovision GV-BL1300.
The
Geovision GV-BL130D is a 1.3 megapixel
infrared network bullet camera capable of capturing a video image of
1280 x 1024 (1.3 megapixel) resolution at
30 frames per second. This infrared network bullet camera has a 1/3" progressive scan CMOS image sensor. The
3 - 9mm varifocal lens allows the user to choose from a wide range of viewing angles.
The GV-BL130D has an
IP66 weatherproof housing and uses a cable through bracket design for maximum outdoor protection. The
infrared LED's have an
effective range of up to 15 meters / 45 feet and allow the camera to see in zero light.
This camera can be powered by either
12V-DC,
24V-AC or
POE (POE 802.3af). The POE option runs both video and power over one Cat-5 cable, making for a much easier installation. The GV-BL130D can be mounted in either the ceiling or wall position (
Mounting Positions).
3 way Active Tampering Alarm
|
Tamper Alarm |
Focus Change Alarm |
Camera Shift Alarm |
Geovision GV-BL130D Features
-
1/3" progressive scan CMOS image sensor
-
3 - 9 mm Vari-focal Lens
-
Dual video streams from two of H.264, MPEG4 and MJPEG
30 fps at 1280 x 1024 resolution (1 Megapixel)
-
IP66 Weatherproof compliant
-
Concealed cable through bracket design
-
Includes 32 Channel Geovision Software - 32 Channel NVR
-
Mobile Phone Remote Viewing from iPhone, Android, and Windows Mobile
- Free iPhone and Android apps provided
-
Built-in IR LED with an effective range of 15 meters / 45 feet
-
One sensor input and alarm output
-
Motion detection
-
Tampering alarm
-
Privacy mask
-
IP address filtering
-
3GPP/ISMA
-
DC12V / AC24V / PoE
-
16 languages on Web interface
Ceiling Mount | | Wall Mount | |
 | |
 | |
Click on the images above to enlarge.
32 Channel Geovision Software
Each Geovision camera includes a free 32 channel software license which can be used with any Geovision IP camera. Install the software on a Windows computer and create a PC based surveillance DVR / NVR for your Geovision cameras. Click here to view the latest
Geovision software specification.
Remote Viewing Support
Geovision includes many options to view your cameras remotely over a local network and also remotely over the Internet. Remote viewing is supported by both Windows and Mac based PCs. Geovision also includes support to view cameras from mobile devices including: iPhone, iPad, iPod Touch, Android, Blackberry, Windows Mobile, Symbian, and other 3G / 3GPP cell phones. Geovision provides free apps for all of these types of devices. Some remote viewing methods require use of the NVR software that is included with the camera and some methods can connect directly to the camera and do not require a PC. Click here for more information on Geovision remote access options.
PoE for IP Camera
This IP camera is PoE (power over Ethernet) compliant which allows the installer to run a single CAT-5e cable to provide both power and data connectivity to the camera. CCTV Camera Pros supplies the following PoE injectors and PoE network switches which are compatible with this camera.
Please refer to these diagrams, to learn more about how to wire IP cameras using a PoE injectors or a PoE switch.
